HIKVISION DS-7100NI-E1 Series, User Manual

Page: 31 / 182

Network Video Recorder User Manual
30
3. After having added the IP camera (s), click Exit to back to the Wizard.
2.3 Using the Wizard for Basic Configuration
Purpose:
After admin password is set, the setup wizard pops up automatically. It can walk you through some basic settings
of the NVR.
Figure 2. 19 Start Wizard Interface
Steps:
1.
If you don’t want to use the setup wizard at that moment, click the
Exit button. You can also choose to use
the Setup Wizard next time by leaving the “Start wizard when the device starts?” checkbox checked.
2. Click the Next button to enter the Date and Time Settings interface.
Figure 2. 20 Date and Time Settings
3. After the time settings, click Next button which takes you back to the Basic Network Setup Wizard
interface.