HIKVISION DS-7100NI-E1 Series, User Manual

Page: 117 / 182

Network Video Recorder User Manual
116
8.5 Line Crossing Detection Alarm
Purpose:
This function can be used for detecting people, vehicles and objects cross a set virtual line. The line crossing
direction can be set as bidirectional, from left to right or from right to left. And you can set the duration for the
alarm response actions, such as full screen monitoring, audible warning, etc.
Steps:
1. Enter the VCA settings interface.
Menu> Camera> VCA
2. Select the camera to configure the VCA.
3. Select the VCA detection type to Line Crossing Detection .
4. Check the Enable checkbox to enable this function.
5. Click to configure the trigger channel, arming schedule and linkage actions for the line crossing
detection alarm.
6. Click the Rule Settings button to set the line crossing detection rules.
1) Select the direction to A<->B, A->B or A<-B.
A<->B : Only the arrow on the B side shows; when an object going across the configured line with both
direction can be detected and alarms are triggered.
A->B : Only the object crossing the configured line from the A side to the B side can be detected.
B->A : Only the object crossing the configured line from the B side to the A side can be detected.
2) Click-and-drag the slider to set the detection sensitivity.
Sensitivity: Range [1-100]. The higher the value is, the more easily the detection alarm can be triggered.
3) Click- OK to save the rule settings and back to the line crossing detection settings interface.
Figure 8. 13 Set Line Crossing Detection Rules
7. Click and set two points in the preview window to draw a virtual line.
You can use the to clear the existing virtual line and re-draw it.
Up to 4 rules can be configured.