HIKVISION DS-7100HVI-SL Series User Manual Download

Page: 99 / 143

User Manual of DS-7100HWI/HVI-SL Series DVR

Click the

Apply

button to save and exit the interface.

8.2.6 Configuring Multicast

Purpose:

The multicast can be configured to realize live view for more than the maximum number of cameras through

network.

A multicast address spans the Class-D IP range of 224.0.0.0 to 239.255.255.255. It is recommended to use the

IP address ranging from 239.252.0.0 to 239.255.255.255.

Steps:

Enter the Network Settings interface.

Menu > Configuration > Network

Select the

More Settings

tab to enter the More Settings interface.

Set

Multicast IP

. When adding a device to the CMS (Client Management System) software, the

multicast address must be the same as the device’s multicast IP.

Figure 8.18 Configure Multicast

Click the

Apply

button to save and exit the interface.

8.2.7 Configuring RTSP

Purpose:

The RTSP (Real Time Streaming Protocol) is

network control protocol designed for use in entertainment and

communications systems to control streaming media servers.

Steps:

Enter the Network Settings menu by clicking Menu > Configuration > Network.

Select the

More Settings

tab to enter the More Settings men.

Figure 8.19 RTSP Settings Interface

Enter the RTSP port in the text field of

RTSP Service Port

. The default RTSP port is 554, and you

can change it according to different requirements.

Summary of Contents for DS-7100HVI-SL Series
















































































































































Search results

Summary of Contents for DS-7100HVI-SL Series

Reviews:

Related manuals for DS-7100HVI-SL Series

Brands by name

Popular brands

HIKVISION DS-7100HVI-SL Series, User Manual

Search results

Summary of Contents for DS-7100HVI-SL Series

Reviews:

Related manuals for DS-7100HVI-SL Series

Brands by name

Popular brands