HIKVISION DS-7100HVI-SL Series User Manual Download

Page: 76 / 143

User Manual of DS-7100HWI/HVI-SL Series DVR

Figure 6.13 Result of Event Search

Select record files to export.

You can enter the Export interface by the following two ways:



Select motion detection event (s) from the list and click

Quick Export

button to enter the Export

interface, as shown in Figure 6.15.



(1) Click the

Details

button to enter the interface with detailed information of the record file, e.g.,

start time, end time, file size, etc.

Note:

The size of the currently selected files is displayed in the lower-left corner of the window.

(2) Select record file (s) from the list and click

Export

button to enter the Export interface, as

shown in Figure 6.15.

Figure 6.14 Event Details Interface

Export the selected record files.

Click the

Export

button and start backing up.

Note:

If the inserted USB device is not recognized:

•

Click the Refresh button.

•

Reconnect device.

Summary of Contents for DS-7100HVI-SL Series
















































































































































Search results

Summary of Contents for DS-7100HVI-SL Series

Reviews:

Related manuals for DS-7100HVI-SL Series

Brands by name

Popular brands

HIKVISION DS-7100HVI-SL Series, User Manual

Search results

Summary of Contents for DS-7100HVI-SL Series

Reviews:

Related manuals for DS-7100HVI-SL Series

Brands by name

Popular brands