Thermal & Optical Bi-spectrum Network Camera User Manual
67
Set Log Server
The log server should support syslog (RFC 3164) over TLS.
Steps
1. Check Enable Log Upload Server.
2. Input Log Server IP and Log Server Port.
3. Click Test to test the settings.
4. Install client certificate.
1) Click Create to create the certificate request. Fill in the required information in the pop-up
window.
2) Click Download to download the certificate request and submit it to the trusted certificate
authority for signature.
3) Install the signed certificate to the device.
5. Install the CA certificate to the device.
10.12.3 Set IP Address Filter
IP address filter is a tool for access control. You can enable the IP address filter to allow or forbid
the visits from the certain IP addresses.
IP address refers to IPv4.
Steps
1. Go to Configuration → System → Security → IP Address Filter.
2. Check Enable IP Address Filter.
3. Select the type of IP address filter.
Forbidden
IP addresses in the list cannot access the device.
Allowed
Only IP addresses in the list can access the device.
4. Edit the IP address filter list.
Add
Add a new IP address to the list.
Modify
Modify the selected IP address in the list.
Delete
Delete the selected IP address in the list.
5. Click Save.
10.12.4 Set HTTPS
HTTPS is a network protocol that enables encrypted transmission and identity authentication,