Thermal & Optical Bi-spectrum Network Camera User Manual
10
Add Original Data on Capture
Check to add data on alarm triggered capture of thermal channel.
Add Original Data on Stream
Check to add original data on thermal view.
Data Refresh Interval
It means the refresh interval of temperature information.
Unit
Display temperature with Degree Celsius (°C)/Degree Fahrenheit (°F)/Degree Kelvin (K).
Temperature Range
Select the temperature measurement range.
Version
View the version of current algorithm.
4. Click Save.
What to do next
●
If there is a black body in the detection scene, go to Configuration → Temperature Screening →
Temperature Screening Configuration to set the black body parameters to increase
temperature measurement accuracy. See Set Black Body Correction for instructions.
●
If the actual temperature of a target is slightly different from its surface temperature taken by
the device, you can add temperature compensation value to the measurement to show a more
accurate temperature. Go to Configuration → Temperature Screening → Temperature
Screening Configuration to Set Temperature Compensation.
Set Normal Mode
This function is used to measure the temperature of the whole scene and alarm.
Steps
1. Go toConfiguration → Temperature Measurement → Basic Settings, and check Enable
Temperature Measurement.
2. Refer to Set Thermography Parameters to set the parameters.
3. Go toConfiguration → Temperature Measurement → Advanced Settings, and select Normal.
4. Configure the parameters of normal mode.
Emissivity
Set the emissivity of your target. The emissivity of each object is different.
Distance
The distance between the target and the device.
Pre-Alarm Threshold