Thermal & Optical Bi-spectrum Network Camera User Manual
26
Note
Attached image is only supported in the email notification triggered by Temperature
Measurement alarms and No Wearing Mask alarms.
●
If you check Upload Optical Picture only, a notification email has 3 captured images of the
optical channel with configurable capture interval.
●
If you check Upload Thermal Picture only, a notification email has 3 captured images of the
thermal channel with configurable capture interval.
●
If you check both Upload Optical Picture and Upload Thermal Picture
○
When the VCA type is Temperature Screening, the notification is attached with 1 target
image, 1 optical channel image, and 1 thermal channel image.
○
When the VCA type is Temperature Measurement, the notification is attached with 1
optical channel image and 1 thermal channel image.
5) Input the receiver's information, including the receiver's name and address.
6) Click Test to see if the function is well configured.
3. Click Save.
5.2.4 Notify Surveillance Center
Check Notify Surveillance Center, the alarm information is uploaded to the surveillance center
when an alarm event is detected.
5.2.5 Trigger Recording
Check Trigger Recording, and the device records the video about the detected alarm event.
For device with more than one camera channels, you can set one or more channels to take
recordings if needed.
For recording settings, refer to Video Recording and Picture Capture
5.2.6 Audible Warning
After enabling Audible Warning and setting Audible Alarm Output, the built-in speaker of the