manualshive.com logo in svg

HIKVISION DS-2DE2A204IW-DE3, User Manual, Page: 85 / 101

Share
Download
HIKVISION DS-2DE2A204IW-DE3 User Manual Download Page 85

Note

Complete certificate management before selecting server certificate. Refer to Certificate

Management for detailed information.

SDK Service & Enhanced SDK Service

Check Enable SDK Service to add the device to the client software with SDK protocol.
Check Enable Enhanced SDK Service to add the device to the client software with SDK over

TLS protocol.
When you use Enhanced SDK Service, select the Server Certificate.

Note

●

Complete certificate management before selecting server certificate. Refer to Certificate

Management for detailed information.

●

When set up connection between the device and the client software, it is recommended to

use Enhanced SDK Service and set the communication in Arming Mode to encrypt the data

transmission. See the user manual of the client software for the arming mode settings.

TLS (Transport Layer Security)

The device offers TLS1.1 and TLS1.2. Enable one or more protocol versions according to your

need.

Bonjour

Uncheck to disable the protocol.

3. Click Save.

9.12 Set Alarm Server

The device can send alarms to destination IP address or host name through HTTP, HTTPS, or ISUP

protocol. The destination IP address or host name should support HTTP, HTTP, or ISUP data

transmission.
Steps
1. Go to Configuration → Network → Advanced Settings → Alarm Server .
2. Enter Destination IP or Host Name, URL, and Port.
3. Select Protocol.

Note

HTTP, HTTPS, and ISUP are selectable. It is recommended to use HTTPS, as it encrypts the data

transmission during communication.

4. Click Test to check if the IP or host is available.
5. Click Save.

Network Speed Dome User Manual

74

Summary of Contents for DS-2DE2A204IW-DE3






































































































Reviews:

No comments