manualshive.com logo in svg

HIKVISION DS-2DE2A204IW-DE3, User Manual, Page: 38 / 101

Share
Download
HIKVISION DS-2DE2A204IW-DE3 User Manual Download Page 38

Audio Input

Select MicIn for the built-in microphone, and LineIn for external audio pick-up device.

Note

MicIn is only supported by certain models.

Input volume

Adjust the volume of the audio input.

5.2.2 Environmental Noise Filter

Set it as OFF or ON. When the function is enabled, the noise in the environment can be filtered to

some extent.

5.3 Two-way Audio

It is used to realize the two-way audio function between the monitoring center and the target in

the monitoring screen.
Before You Start

●

Make sure the audio input device (pick-up or microphone) and audio output device (speaker)

connected to the device is working properly. Refer to specifications of audio input and output

devices for device connection.

●

If the device has built-in microphone and speaker, two-way audio function can be enabled

directly.

Steps
1. Click Live View.
2. Click   on the toolbar to enable two-way audio function of the camera.
3. Click   and select 

 , move the slider to adjust the volume.

4. Click   , disable the two-way audio function.

5.4 ROI

ROI (Region of Interest) encoding helps to discriminate the ROI and background information in

video compression. The technology assigns more encoding resource to the region of interest, thus

to increase the quality of the ROI whereas the background information is less focused.

Network Speed Dome User Manual

27

Summary of Contents for DS-2DE2A204IW-DE3






































































































Reviews:

No comments