manualshive.com logo in svg

HIKVISION DS-2DE2A204IW-DE3, User Manual, Page: 94 / 101

Share
Download
HIKVISION DS-2DE2A204IW-DE3 User Manual Download Page 94

Note

Network can identify the priority of data transmission. The bigger the DSCP value is, the higher

the priority is. You need to set the same value in router while configuration.

3. Click Save.

10.12.6 Set IEEE 802.1X

You can authenticate user permission of the connected device by setting IEEE 802.1X.
Go to Configuration → Network → Advanced Settings → 802.1X , and enable the function.
Select protocol and version according to router information. User name and password of server are

required.

Note

●

If you set the Protocol to EAP-TLS, select the Client Certificate and CA Certificate.

●

If the function is abnormal, check if the selected certificate is abnormal in Certificate

Management.

10.12.7 Certificate Management

It helps to manage the server/client certificates and CA certificate, and to send an alarm if the

certificates are close to expiry date, or are expired/abnormal.

Server Certificate/Client Certificate

Note

The device has default self-signed server/client certificate installed. The certificate ID is default.

Create and Install Self-signed Certificate

Steps
1. Go to Configuration → System → Security → Certificate Management .
2. Click Create Self-signed Certificate.
3. Input certificate information.

Note

The input certificate ID cannot be the same as the existing ones.

4. Click OK to save and install the certificate.

The created certificate is displayed in the Server/Client Certificate list.

Network Speed Dome User Manual

83

Summary of Contents for DS-2DE2A204IW-DE3






































































































Reviews:

No comments