Do not aim the camera at the sun or extra bright
places.
The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not expose the device to high electromagnetic
radiation or extremely hot, cold, dusty or damp
environment.
To avoid heat accumulation, good ventilation is
required for the operating environment.
Keep the camera away from liquid while in use for
non-water-proof device.
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
The beam of the light at the distance of 200 mm is
classified as Risk Group 1 (RG1). Possible hazardous
optical radiation emitted from this product.
DO NOT stare at operating light source. May be
harmful to the eyes.
Wear appropriate eye protection or turn on the
supplement light only at a safe distance (0.25 m) or in
the area that is not directly exposed to the light when
installing or maintaining the device.
1
Introduction
1.1
Product Features
The main features are as follows:
High performance CMOS sensor
OSD menu with configurable parameters
Smart light
3-axis adjustment
Hybrid supplement light with IR and white light
1.2
Overview
1.2.1
Overview of Type I Camera
Bracket
Main Body
Lens
Power Cord
Video Cable
Switch Button
Figure 1-1
Overview of Type I Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.
1.2.2
Overview of Type II Camera
Main Body
Switch Button
Power Cord
Video Cable
Lens
Microphone
Bracket
Figure 1-2
Overview of Type II Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS.
