Figure 2-21
Fix the Junction Box Cover and Junction Box
Body
7.
Route the cables through the bottom cable hole or
the side cable hole of the junction box.
8.
Refer to step 5 of 2.3.1 Ceiling Mounting without
Junction Box to adjust the angle and finish the
installation.
2.3.3
Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1.
Drill Φ 10 mm screw holes in the wall where you
want to install the wall mount.
2.
Use four M6 expansion bolts to fix the wall mount
onto the wall.
Figure 2-22
Fix the Wall Mount
3.
Use three PM4 screws to fix the installation plate
onto the wall mount.
Figure 2-23
Fix the Installation Plate
4.
Refer to steps 3 to 5 of Section 2.3.1 Ceiling
Mounting without Junction Box to finish installation.
Figure 2-24
Finish Installation
3
Menu Description
Please follow the steps below to call the menu.
Note:
The actual display may vary with your camera model.
