HIKVISION DS-2CE16D0T-LFS Manual Download Page 2

Initiatives on the Use of Video Products 
Thank you for choosing Hikvision products. 
Technology affects every aspect of our life. As a 

high-tech company, we are increasingly aware of the 
role technology plays in improving business efficiency 

and quality of life, but at the same time, the potential 

harm of its improper usage. For example, video 
products are capable of recording real, complete and 

clear images. This provides a high value in retrospect 

and preserving real-time facts. However, it may also 

result in the infringement of a third party’s legitimate 

rights and interests if improper distribution, use and/or 

processing of video data takes place. With the 

philosophy of “Technology for the Good”, Hikvision 

requests that every end user of video technology and 

video products shall comply with all the applicable laws 

and regulations, as well as ethical customs, aiming to 

jointly create a better community. 
Please read the following initiatives carefully: 
1.

 

Everyone has a reasonable expectation of privacy, 

and the installation of video products should not 
be  in  conflict  with  this  reasonable  expectation. 

Therefore,  a  warning  notice  shall  be  given  in  a 

reasonable  and effective  manner  and clarify  the 
monitoring range, when installing video products 

in  public  areas.  For  non-public  areas,  a  third 

party’s  rights  and  interests  shall  be  evaluated 
when installing video products, including but not 

limited  to,  installing  video  products  only  after 

obtaining  the  consent  of  the  stakeholders,  and 
not installing highly-invisible video products. 

2.

 

The  purpose  of  video  products  is  to  record  real 

activities  within  a  specific  time  and  space  and 
under  specific  conditions.  Therefore,  every  user 
shall first reasonably define his/her own rights in 

such  specific  scope,  in  order  to  avoid  infringing 
on  a  third  party’s  portraits,  privacy  or  other 
legitimate rights. 

3.

 

During  the  use  of  video  products,  video  image 
data derived from real scenes will continue to be 
generated, including a large amount of biological 

data  (such  as  facial  images),  and  the  data  could 
be  further  applied  or  reprocessed.  Video 
products  themselves  could  not  distinguish  good 

from  bad  regarding  how  to  use  the  data  based 
solely  on  the  images  captured  by  the  video 
products.  The  result  of  data  usage  depends  on 

the  method  and  purpose  of  use  of  the  data 
controllers.  Therefore,  data  controllers  shall  not 
only  comply  with  all  the  applicable  laws  and 

regulations  and  other  normative  requirements, 
but  also  respect  international  norms,  social 
morality,  good  morals,  common  practices  and 

other non-mandatory requirements, and respect 
individual  privacy,  portrait  and  other  rights  and 
interests. 

4.

 

The rights, values and other demands of various 
stakeholders  should  always  be  considered when 
processing  video  data  that  is  continuously 

generated  by  video  products.  In  this  regard, 
product security and data security are extremely 
crucial.  Therefore,  every  end  user  and  data 

controller,  shall  undertake  all  reasonable  and 
necessary measures to ensure data security and 
avoid  data  leakage,  improper  disclosure  and 

improper  use,  including  but  not  limited  to, 
setting  up  access  control,  selecting  a  suitable 
network  environment  (the  Internet  or  Intranet) 

where 

video 

products 

are 

connected, 

Summary of Contents for DS-2CE16D0T-LFS




















Reviews: