2.
Pry the mounting base by using a flat object, for
example, a coin.
Coin
Figure 2-7
Pry the Mounting Base
3.
Drill screw holes and the cable hole on the ceiling.
4.
Attach the mounting base to the ceiling and secure
it with supplied screws. For cement ceiling, you
need to install the expansion bolts at first.
PA4×25 Screws
Expansion Bolts
Figure 2-8
Attach Mounting Base to Ceiling
5.
Route the cables through the cable hole.
6.
Install the camera back to the mounting base and
secure it.
Figure 2-9
Install Camera Back
7.
Connect the corresponding cables, such as power
cord, and video cable.
8.
Power on the camera to adjust the view angle
according to the figure below.
Tilt Position
[0° to 75°]
Roatation Position
[0° to 360°]
Pan Position
[0° to 360°]
Figure 2-10
3-Axis Adjustment
1).
Rotate the enclosure to adjust the pan position
[0° to 360°].
2).
Move the main body up and down to adjust the
tilt position [0° to 75°].
3).
Rotate the main body to adjust the rotation
position [0° to 360°].
2.2.2
Ceiling Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Steps:
1.
Drill screw holes on the wall.
