The function is only supported in TVI mode.
OFF, H, V, and HV are selectable for mirror.
OFF: The mirror function is disabled.
H: The image flips 180° horizontally.
V: The image flips 180° vertically.
HV: The image flips 180° both horizontally and
vertically.
3.4
AUDIO SETTINGS
Under the AUTO SETTINGS sub-menu, you can set the
mode to ON or OFF. Adjust the LEVEL to a higher value
to raise the volume.
AUDIO SETTINGS
AUDIO
LEVEL
BACK
EXIT
SAVE&EXIT
ON
2
Figure 3-5
AUTO SETTINGS
3.5
SMART LIGHT
Under the SMART LIGHT sub-menu, you can set the
mode to OFF or AUTO.
OFF
Set it to OFF to give up this function.
AUTO
You can set THRESHOLD and LEVEL in this section.
THRESHOLD
The higher the threshold is, the more sensitive the
device is to dark environment.
LEVEL
You can adjust the maximum brightness of supplement
light.
MODE
The function is to reduce frame rate in low-light
environment in order to increase SNR and enhance the
brightness of the image.
MODE1: Turn on the function.
MODE2: Turn off the function.
3.6
FUNCTIONS
ALARM SETTINGS
Note:
The function is only supported in TVI mode.
PIR LEVEL: Adjust the sensitivity of the PIR module. The
higher the value is, the more sensitive the PIR module
is.
PIR DET MODE: You can set the PIR DET MODE to
INDOOR or OUTDOOR to meet your needs.
ALARM SOURCE:
The content of audible warning.
ALARM TIMES: The frequency of audible and visual
warning for an alarm event.
SPEAKER: Set the channel to output the audible
warning.
AUTO: The device automatically choose the way to
output the audible warning.
BUILT-IN: The device outputs audible warning via
built-in speaker.
