Figure 2-4
Secure the Junction Box on the Wall
7.
Route the cables through the bottom cable hole or
side cable hole of the junction box and connect the
cables.
8.
Fix the junction box cover on its body with three
PM3 × 16 L6 screws.
Figure 2-5
Fix the Cover to Its Body
9.
Refer Step 6 of Section 2.1.1 to finish installation.
2.2
Installation of Type III, Type IV and Type V Camera
Before you start:
The installation of type III, type IV and type V camera
are similar. Following pictures are only for reference.
Take the actual object as standard.
2.2.1
Ceiling Mounting without Junction Box
Steps:
1.
Paste the drill template (supplied) to the installation
location.
2.
(Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
3.
Install the camera to ceiling.
For Type III and Type V camera:
i.
Secure the installation plate to the ceiling with
three PA4 × 25 screws (supplied).
ii.
Fit the camera onto the installation plate.
iii.
Turn the camera as the figure below until it snaps
into the installation plate.
Figure 2-6
Install the Camera to Ceiling
For Type IV camera:
i.
Loosen the set screw.
ii.
Rotate the camera to align the triangle mark with
the screw hole, and dissemble the camera.
