Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS
1.2.5
Overview of Type V Camera
Installation Plate
Base
Enclosure
Switch Button
Main Body
Microphone
Power Cord
Video Cable
Figure 1-9
Overview of Type V Camera (DF3T Series)
Installation Plate
Base
Enclosure
Main Body
Microphone
Video Cable
Line-in
Power Cord
Switch Button
Figure 1-10
Overview of Type V Camera (DF8T Series)
Notes:
Line-in is for external pick-up. The cable is only
available for DF8T series.
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS
2
Installation
Before you start
Make sure that the device in the package is in good
condition and all the assembly parts are included.
Make sure that all the related equipment is power-off
during the installation.
Check the specification of the products for the
installation environment.
Check whether the power supply is matched with
your power output to avoid damage.
Make sure the wall is strong enough to withstand
three times the weight of the camera and the mount.
If the product does not function properly, contact
your dealer or the nearest service center. DO NOT
disassemble the camera for repair or maintenance by
yourself.
2.1
Installation of Type I and Type II Camera
Before you start:
The installation of type I and type II camera are similar.
Following guide takes type I as example.
2.1.1
Ceiling/Wall Mounting without Junction Box
Steps:
1.
Paste the drill template (supplied) to the installation
location.
