Figure 2-48
Combine Junction Box Cover with Body
11.
Refer to step 7 of 2.4.1 Ceiling Mounting Without
Junction Box to adjust the angle.
2.5.3
Wall Mounting
Before you start:
You need to purchase a wall mount in advance.
Steps:
1.
Drill Φ 10 mm screw holes in the wall where you
want to install the wall mount.
2.
Use four M6 expansion bolts to fix the wall mount
onto the wall.
Figure 2-49
Fix the Wall Mount
3.
Use three PM4 × 10 screws to fix the gang box onto
the wall mount.
Figure 2-50
Fix the Gang Box
4.
Repeat the step 4 to 7 of 2.4.1 Ceiling Mounting
Without Junction Box to finish the installation.
Figure 2-51
Finish the Installation
3
Menu Description
Please follow the steps below to call the menu.
Note:
The actual display may vary with your camera model.
Steps:
1.
Connect the camera with the TVI DVR and the
monitor, as shown in figure 3-1.
