manualshive.com logo in svg

HIKVISION DS-2CD6825G0/C-I(V)(S), User Manual

Share
Download
HIKVISION DS-2CD6825G0/C-I(V)(S) User Manual Download Page 51

Network Camera User Manual 

50 

 

the Start Time and End Time. 

 

Figure 6-9

 

Set Schedule 

 

Auto:

 The LED will be turned on according to the environment illumination. 

5.

 

Click Save to save the settings. 

6.2.7

 

Open Source Software License 

Information  about  the  open  source  software  that  applies  to  the  IP  camera  can  be 

checked if required. Go to 

Configuration > System Settings > About.

 

6.3

 

Maintenance 

 

Upgrade & Maintenance 

Purpose: 

The upgrade & maintenance interface allows you to process the operations, including 

reboot,  partly  restore,  restore  to  default,  export/import  the  configuration  files,  and 

upgrade the device. 

Enter  the  Maintenance  interface: 

Configuration

  > 

System

  > 

Maintenance

  > 

Upgrade & Maintenance

. 

 

Reboot

: Restart the device. 

 

Restore:

 Reset all the parameters, except the IP parameters and user information, 

to the default settings. 

 

Default

: Restore all the parameters to the factory default. 

Notes:

   

•

 

After  restoring  the  default  settings,  the  IP  address  is  also  restored  to  the 

default IP address, please be careful for this action. 

Summary of Contents for DS-2CD6825G0/C-I(V)(S)














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands