Network Camera User Manual
111
Scene change detection function detects the change of surveillance environment
affected by the external factors, such as the intentional rotation of the camera. Some
certain actions can be taken when the alarm is triggered.
Note:
Scene change detection function varies according to different camera models.
Steps:
1.
Enter the Scene Change Detection settings interface,
Configuration > Event >
Smart Event > Scene Change Detection
.
Figure 10-11
Scene Change Detection
2.
Check the checkbox of
Enable
to enable the function.
3.
Click-and-drag the slider to set the detection sensitivity. The sensitivity value
ranges from 1 to 100, and the higher the value is, the more easily the change of
scene can trigger the alarm.
4.
Click
Arming Schedule
to set the arming schedule. Refer to
Task 2 Set the
Arming Schedule for Motion Detection
in
Section 10.1.1
for detailed steps
.
5.
Click
Linkage Method
to select the linkage methods for scene change, including
Notify Surveillance Center, Send Email, Upload to FTP/Memory Card/NAS,
Trigger Channel and Trigger Alarm Output.
6.
Click
Save
to save the settings.
