HIKVISION DS-2CD2132-I User Manual Download Page 53

Page: 53 / 95

User Manual of Network Camera

6.5.3

Configuring Text Overlay Settings

Purpose:

You can customize the text overlay.

Steps:

Enter the Text Overlay Settings interface:

Configuration > Advanced Configuration > Image > Text Overlay

Check the checkbox in front of textbox to enable the on-screen display.

Input the characters in the textbox.

Use the mouse to click and drag the red text frame

in the live view

window to adjust the text overlay position.

Click

Note:

There are up to 4 text overlays configurable.

Figure 6-22

Text Overlay Settings

6.5.4

Configuring Privacy Mask

Purpose:

Privacy mask enables you to cover certain areas on the live video to prevent certain
spots in the surveillance area from being live viewed and recorded.

Steps:

Enter the Privacy Mask Settings interface:

Configuration > Advanced Configuration> Image > Privacy Mask

Check the checkbox of

Enable Privacy Mask

to enable this function.

Lo-Call 1890 866 900

www.cctvireland.ie

[email protected]

Summary of Contents for DS-2CD2132-I































































































Search results

Summary of Contents for DS-2CD2132-I

Reviews:

HIKVISION DS-2CD2132-I, User Manual, Page: 53 / 95

Search results

Summary of Contents for DS-2CD2132-I

Reviews: