HIKVISION DS-2CD2132-I User Manual Download Page 36

Page: 36 / 95

User Manual of Network Camera

pictures in playback mode.



Save clips to:

Set the saving path of the clipped video files in playback mode.

Note

You can click

to change the directory for saving the clips and

pictures.

Click

to save the settings.

6.2

Configuring Time Settings

Purpose:

You can follow the instructions in this section to configure the time synchronization
and DST settings.

Steps:

1. Enter the Time Settings interface:

Configuration > Basic Configuration >

System > Time Settings

Configuration > Advanced Configuration >

System > Time Settings

Figure 6-2

Time Settings



Select the Time Zone.

Select the Time Zone which is the closest to the location of the camera from the
drop-down menu.



Synchronizing Time by NTP Server.

(1)

Check the checkbox to enable the

NTP

function.

(2)

Configure the following settings:

Server Address:

IP address of NTP server.

NTP Port:

Port of NTP server.

Interval:

The time interval between the two synchronizing actions with NTP

server.

Lo-Call 1890 866 900

www.cctvireland.ie

[email protected]

Summary of Contents for DS-2CD2132-I































































































Search results

Summary of Contents for DS-2CD2132-I

Reviews:

HIKVISION DS-2CD2132-I, User Manual, Page: 36 / 95

Search results

Summary of Contents for DS-2CD2132-I

Reviews: