HIKVISION DS-2CD2132-I User Manual Download Page 47

Page: 47 / 95

User Manual of Network Camera

Click

to save the settings.

6.4

Configuring Video and Audio Settings

6.4.1

Configuring Video Settings

Steps:

Enter the Video Settings interface:

Configuration >Basic Configuration >

Video / Audio > Video

Configuration > Advanced Configuration >

Video / Audio > Video

Figure 6-17

Configure Video Settings

Select the

Stream Type

of the camera to main stream (normal), sub-stream or

third stream.

The main  stream is  usually for  recording  and  live  viewing  with  good  bandwidth,
and  the  sub-stream  and  third  stream  can  be  used  for  live  viewing  when  the
bandwidth is limited.

You can customize the following parameters for the selected main stream or
sub-stream:

Video Type

Select the stream type to video stream, or video & audio composite stream. The
audio signal will be recorded only when the

Video Type

Video & Audio

Resolution:

Select the resolution of the video output.

Bitrate Type:

Select the bitrate type to constant or variable.

Video Quality:

When bitrate type is selected as

Variable

, 6 levels of video quality are selectable.

Lo-Call 1890 866 900

www.cctvireland.ie

[email protected]

Summary of Contents for DS-2CD2132-I































































































Search results

Summary of Contents for DS-2CD2132-I

Reviews:

HIKVISION DS-2CD2132-I, User Manual, Page: 47 / 95

Search results

Summary of Contents for DS-2CD2132-I

Reviews: