HD-TVI Speed Dome DS-2AE7232TI-A User Manual
UM THD DS-2AE7232T-x 020519NA
18
Protocol and RS-485 Settings
1.
Select the protocol. Set the protocol on the
PROTOCOL
submenu to
AUTO MATCH, PELCO-P, PELCO-D,
or
HIKVISION
.
AUTO MATCH
is protocol self-adaptive.
2.
Set the protocol status. Set the
PROTOCOL STATUS
to
ON
to enable the user-defined protocol.
3.
Enable the RS-485 configuration diagnosis. You can set
485 CHECK
to
ON
or
AUTO
for automatic RS-485
configuration diagnosis. If the configuration is incorrect, an alert will be received. If you set the value
to
AUTO
, it will automatically stop the diagnosis when no errors exist.
Power Memory Settings
The dome can resume its previous PTZ status after it restarts from power off when it stops at a position
longer than the predefined time. You can set the memory time to 10s, 30s, 60s, 180s, and 300s.
Hikvision-C (Coaxitron) Control
The Coaxial Transmission function can be enabled to transmit the RS-485 signal along with the video
signal via the BNC cable. If the connected encoding device supports coaxial transmission as well, the RS-
485 cable will not be necessary.
1.
Enable the Coaxial Control function by setting the
COAXITRON ACTIVE
option to
ON
.
2.
Select the Coaxial Control protocol to
HIK-C
.
NOTE:
Set the transmission protocol of the connected encoding device to the same value as the
speed dome to support the coaxial transmission.
Configuring Image Parameters
Configuring Camera Parameters
Purpose:
You can set the camera parameters including focus, shutter speed, iris, etc. Enter the camera parameters
settings menu:
MAIN MENUS > DOME SETTINGS > CAMERA PARAMETER
.