HIKVISION CSR-I Series, User Manual

Page: 5 / 21

-3-
DB9 female Wire color Signal Illustration Remarks
1 Brown A
＋
Transmission and
Reception
The positive terminal of receiving and
transmitting differential signal
2 White
B
－
Transmission and
Reception
The negative terminal of receiving and
transmitting differential signal
5 Green GND Radar Earth Signal Earth
Table 1.3 Communication Interface Definition of CSR-I Radar
Attention: The communication interface should be designated before leaving the factory. There
will be a specific mark on the rear cover of the radar with RS485 interface and it defaults to RS232 for
the radar without marks.
Chapter 2 Installation and Usage of Product
1. Common installation methods
a. Top loading mode
This mode is to install the radar on T-type pole, L-type ploe, gantry and so on, in order
to measure speed from the top of the target, shown in figure 2.1. It is suitable for static speed
measurement, security monitoring, traffic flow detection and so on.
Recommendation for the radar model: CSR-IN
、
CSR-IK
、
CSR-IX