HIKVISION AE-MD5043, User Manual

Page: 33 / 57

Mobile Video Recorder User Manual
25
The positioning information will be uploaded according to the set interval.
The positioning information will be displayed in the live view and playback mode of the
selected channel.
Configure linkage actions.

If you want the speeding vehicle to trigger the speed alarm, check Trigger Alarm Output.

If you want the speeding vehicle to trigger the system to beep, check Audible Warning.
Click Save.
Configure G-Sensor Alarm
G-Sensor detects and records acceleration information in 3-axial (X, Y, Z) directions.
Before You Start
Connect a G-sensor to the recorder.
Go to Configuration > Vehicle > G-Sensor.
Configure G-Sensor
Select module according to actual situation.

External: The G-sensor is connected to the device through RS-232/RS-485 interface.

Built-in: The G-sensor is a built-in module of the device.
Set the limit value for acceleration alarm in X, Y and Z directions.
X, Y and Z represent the direction of acceleration and the unit of alarm value is G (G=9.8 m/s
2
).
During driving, the recorder will alarm when acceleration of any direction exceeds the set value.
Set the linkage actions for acceleration alarm, including Audible Warning and Alarm Output.
Click Save.