ID2000 Series Smart Code Reader User Manual
41
related parameters according to actual demands.
Note
●
Light source parameters may differ by device models.
●
Make sure you have selected the device to be set in
Device Connection
before setting light
source parameters.
Steps
1. Go to
Image Settings
→
Light
, and enable
Aiming Light Enable
according to actual demands.
2. Enable
Lighting Enable
to enable the light source according to actual demands.
3. (Optional) Set
Lighting Duration
and
Precharge Time
if
Lighting Enable
is enabled.
Figure 8-5 Set Light Source
8.1.4 Set Lens Focus
The type III device adopts the high-speed vari focal lens, and it can complete single focus adjustment
in 5 ms. The device also supports focus adjustment via external devices, and it is applicable to the
mixed line production.
The type III device supports setting lens focus via the client software, and two ways are available to
set lens focus, including auto focus and manual focus.
Note
●
The lens focus function may differ by device models.
●
Setting the device mode as
Test
is required before setting lens focus. After completion, you
should set the device mode as
Normal
.
Auto Focus
Steps
1. Click
in the live view window.