ID2000 Series Smart Code Reader User Manual
3
Figure 1-4 Appearance (Type IV)
Table 1-1 Component Description
No.
Name
Description
1
Focus Knob
It is used to adjust focal length manually.
Note
Only type I device has the focus knob.
2
Screw Hole
It is used to fix the device to the installation position.
●
For type I, II and III devices, you should use M2 screw.
●
For type IV device, you should use M3 screw.
3
Trigger Button
When the device is in trigger mode, press the button and the device
triggers once.
4
SR Cable
SR cable connector provides power, I/O, Ethernet, and serial port.