English
40
THE SWITCH PANEL
CAUTION
Do not subject the switch panel to shock or damage.
1. Switch operation (
Fig. 13
)
The vacuum of the appliance can be switched
between three stages of operation, depending on
your need.
When the power is o
ff
, pressing the 3 button or
the 2 / 1 button will switch the appliance on. At the
same time, the LED light will switch on. To switch
between MID mode and LOW mode, press the 2 / 1
button.
To suppress noise when using the appliance, switch
to 1 mode.
To shut o
ff
the appliance, press the Ø button. This will also switch o
ff
the LED light.
Mode
Continuous operating time
BSL36A18
3 (HIGH)
Approx. 15 min
2 (MID)
Approx. 30 min
1 (LOW)
Approx. 60 min
∗
Continuous operating time will vary according to battery condition.
Please use the table as a guideline.
2. The Indicator Lamp (
Fig. 14
)
Notice
about
fi
lter cleaning
If
the
fi
lter becomes clogged and suction power decreases, the
indicator lamp will illuminate, and the LED light will
fl
ash.
If this happens, promptly empty the dust case and clean the
fi
lter. (See “EMPTYING THE
DUST CASE” on page 44.)
Notice about intake port blockage
If the intake port becomes blocked during use - for example while vacuuming carpets - the
main unit will make a pulsing sound, the indicator lamp will illuminate, or the LED light will
fl
ash. However, this is not a sign of a fault.
Clear the blockage from the intake port if this happens.
NOTE
When the indicator lamp illuminates, the appliance will switch automatically to Safe Mode,
running at reduced power to protect the motor and rechargeable battery. The appliance will
stop automatically if Safe Mode continues for a preset duration.
OFF Button
Fig. 13
Switch Panel
Indicator Lamp
HIGH Mode
MID/LOW Mode
LED light
Indicator
Lamp
3
2
1
Ø
Fig. 14
000Book̲R36DB̲ChS.indb 40
000Book̲R36DB̲ChS.indb 40
2022/04/13 17:04:17
2022/04/13 17:04:17
