English
48
Table 4
State of lamp
Battery Remaining Power
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty. Recharge the battery
soonest possible.
Blinks ;
Output suspended due to high temperature. Remove the battery
from the tool and allow it to fully cool down.
Blinks ;
Output suspended due to failure or malfunction. The problem may
be the battery so please contact your dealer.
As the remaining battery indicator shows somewhat di
ff
erently depending on ambient
temperature and battery characteristics, read it as a reference.
NOTE
Do not give a strong shock to the switch panel or break it. It may lead to a trouble.
9. About the Mode change function and Mode display lamp
(
Fig. 9
)
With the battery installed to the main unit and the unit
switched on, pressing the Mode Change switch will
switch the operation mode to auto mode. While in Auto
Mode, the Mode display lamp will remain lit.
○
With Auto Mode, you can lower noise and vibration by
lowering the maximum number of revolutions while in a
no-load state.
While in Auto Mode, the number of revolutions will be
raised if the load becomes greater during operation.
On the other hand, the number of revolutions will be
lowered if the load decreases during operation.
Mode change switch
Fig. 9
Mode display lamp
00Book̲G3618DA̲ChS.indb 48
00Book̲G3618DA̲ChS.indb 48
2021/04/08 14:09:11
2021/04/08 14:09:11
