English
61
MAINTENANCE AND INSPECTION
WARNING
○
Be sure to turned o
ff
the switch and pull out the battery.
○
Using cracked, deformed or damaged wheels can lead to wheel breakage and
resulting serious injury.
1. Inspecting the depressed center wheel
Ensure that the depressed center wheel is free of cracks and surface defects.
2. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that they are properly tightened. Should
any of the screws be loose, retighten them immediately. Failure to do so could result in
serious hazard.
CAUTION
Using this power tool with loosened screws is extremely dangerous.
3. Inspection of terminals (tool and battery)
Check to make sure that swarf and dust have not collected on the terminals.
On occasion check prior, during and after operation.
CAUTION
Remove any swarf or dust which may have collected on the terminals.
Failure to do so may result in malfunction.
4. Cleaning on the outside
When the cordless disc grinder is stained, wipe with a soft dry cloth or a cloth moistened
with soapy water. Do not use chloric solvents, gasoline or paint thinner, for they melt
plastics.
5. Filter cleaning and inspection
WARNING
Wear protective glasses and a dust mask when cleaning the
fi
lter with an air gun.
Failure to do so may result in inhalation or exposure of the eyes to debris or dust.
After use, remove any debris or dust adhered to the
fi
lter using a soft brush. (
Fig. 22
)
Check the
fi
lter periodically to ensure that it is free of
scratching, chipping, or tearing. Replace with a new
fi
lter if the
fi
lter is damaged in any way.
Fig. 22
Mesh
Filter
Soft brush
00Book̲G1810DE̲ChS.indb 61
00Book̲G1810DE̲ChS.indb 61
2022/08/26 16:37:29
2022/08/26 16:37:29
