English
59
Fig. 18
Cutting
wheel
Push button
Wrench
Tighten
Diamond
wheel
Wheel guard
with side
guard
Wheel
washer (A)
Spindle
Wheel nut
G1810DE, G1810DF
Cutting
wheel
Push button
Wrench
Diamond
wheel
Tighten
Wheel guard
with side
guard
Wheel
washer (C)
Spindle
Wheel
nut
G1813DE, G1813DF
2. Disassembling
Follow the above procedures in reverse.
CAUTION
Con
fi
rm that the cutting wheel or diamond wheel is mounted
fi
rmly.
NOTE
○
Avoid using excessive force by modifying the feed rate when operating the tool.
○
The wheel guard for the cutting wheel will heat up to high temperatures from grind sparks.
Do not touch the wheel guard during operation.
HOW TO RECHARGE USB DEVICE
WARNING
○
Prior to use, check the connecting USB cable for any defect or damage.
Using a defective or damaged USB cable can cause smoke emission or ignition.
○
When the product is not being used, cover the USB port with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke emission or ignition.
NOTE
○
There may be an occasional pause during USB recharging.
○
When a USB device is not being charged, remove the USB device from the charger.
Failure to do so may not only reduce the battery life of a USB device, but may also
result in unexpected accidents.
○
It may not be possible to charge some USB devices, depending on the type of device.
00Book̲G1810DE̲ChS.indb 59
00Book̲G1810DE̲ChS.indb 59
2022/08/26 16:37:29
2022/08/26 16:37:29
