11
English
CAUTION
In the operation and maintenance of power tools, the
safety regulations and standards prescribed in each
country must be observed.
Important notice on the batteries for the HiKOKI
cordless power tools
Please always use one of our designated genuine
batteries. We cannot guarantee the safety and
performance of our cordless power tool when used with
batteries other than these designated by us, or when
the battery is disassembled and modi
fi
ed (such as
disassembly and replacement of cells or other internal
parts).
GUARANTEE
We guarantee HiKOKI Power Tools in accordance with
statutory/country speci
fi
c regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling instruction,
to a HiKOKI Authorized Service Center.
Information concerning airborne noise and vibration
The measured values were determined according to
EN62841 and declared in accordance with ISO 4871.
Measured A-weighted sound power level:
85.4 dB (A) (DS18DF)
92.9 dB (A) (DV18DF)
Measured A-weighted sound pressure level:
74.4 dB (A) (DS18DF)
81.9 dB (A) (DV18DF)
Uncertainty K: 5 dB (A).
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to EN62841.
Drilling into metal:
Vibration emission value
a
h
,
D
< 2.5 m/s
2
(DS18DF, DV18DF)
Uncertainty K = 1.5 m/s
2
(DS18DF, DV18DF)
Impact drilling into concrete:
Vibration emission value
a
h
,
ID
= 11.3 m/s
2
(DV18DF)
Uncertainty K = 1.5 m/s
2
The declared vibration total value and the declared noise
emission value have been measured in accordance with a
standard test method and may be used for comparing one
tool with another.
They may also be used in a preliminary assessment of
exposure.
WARNING
○
The vibration and noise emission during actual use
of the power tool can di
ff
er from the declared total
value depending on the ways in which the tool is used
especially what kind of workpiece is processed; and
○
Identify safety measures to protect the operator that
are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is
switched o
ff
and when it is running idle in addition to the
trigger time).
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci
fi
cations herein are subject to
change without prior notice.
000Book̲DS18DF.indb 11
000Book̲DS18DF.indb 11
2021/10/11 17:21:27
2021/10/11 17:21:27
