Handheld Thermal Monocular Camera User Manual
12
3.9 Correct Defective Pixel
The device can correct the defective pixels on the screen which are not performed as expected.
Steps
1. Hold
to show the menu.
2. Select
.
3. Press
to select the offset. The offset refers to the moving length of cursor.
4. Press
or
to select the moving direction.
5. Press
to move the cursor to the position of dead pixel. Press
to correct the dead pixel.
Note
●
The selected defective pixel can be magnified and displayed at the bottom right of the interface.
Figure 3-5 Correct Defective Pixel
●
If the menu blocks the dead pixel, hold
to perform mirror display.
Figure 3-6 Mirror Effect
Summary of Contents for -TS03-W-LH19
Page 1: ...Handheld Thermal Monocular Camera User Manual...
Page 36: ...UD27840B...
