Handheld Thermal Monocular Camera User Manual
4
Chapter 2 Preparation
2.1 Charge Device
After the device starts up, the OSD (on-screen display) shows the battery status. When the battery
is low, charge the device and ensure it works properly.
Before You Start
●
The charging temperature should be from 0 °C to 45 °C (32 °F to 113 °F).
●
Charge the device with the delivered cable.
Steps
1. Lift the cable interface cover.
2. Plug in the cable and charge the device.
Figure 2-1 Cable Interface
●
Flashing Red & Green: error occurred.
●
Solid Red: battery is properly charged.
●
Solid Green: battery is fully charged.
●
OFF: battery is not charged.
2.2 Power On/Off
Power On
Summary of Contents for -TS03-W-LH19
Page 1: ...Handheld Thermal Monocular Camera User Manual...
Page 36: ...UD27840B...
