Thermal Image Scope User Manual
30
VDC/2 A and 1600 mAh. Dispose of used batteries in conformance with the instructions
provided by the battery manufacturer.
●
Use the battery provided by a qualified manufacturer. Refer to the product specification for
detailed battery requirements.
●
Make sure the battery temperature is between 0°C to 45 °C (32 °F to 113 °F) when charging.
●
Install the external battery before the built-in battery runs out, or the device cannot be turned
on.
●
Confirm there is no flammable material within 2 m of the charger during charging.
●
DO NOT place the battery near heating or fire source. Avoid direct sunlight.
●
DO NOT place the battery in the reach of children.
Maintenance
●
If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
●
Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
●
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the device may be impaired.
●
It is recommended to reboot the device every 2 hours when using it to ensure the device
performance.
Using Environment
●
Make sure the running environment meets the requirement of the device. The operating
temperature shall be between -30 °C to 55 °C (-22 °F to 131 °F), and humidity shall be 5% to
95%.
●
DO NOT expose the device to high electromagnetic radiation or dusty environments.
●
DO NOT aim the lens at the sun or any other bright light.
●
Place the device in a dry and well-ventilated environment.
●
When any laser equipment is in use, make sure that the device lens is not exposed to the laser
beam, or it may burn out.
Emergency
●
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District, Hangzhou,
Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products might be subject to export controls in various
countries or regions, including without limitation, the United States, European Union, United
Kingdom and/or other member countries of the Wassenaar Arrangement. Please consult your
professional legal or compliance expert or local government authorities for any necessary export
license requirements if you intend to transfer, export, re-export the thermal series products
between different countries.
