5
1)
Go to
Custom Spot
. Select the
certain custom spot, and press
.
2)
Press
/
/
/
to
adjust the position of the spot.
3)
Press the trigger to finish setting.
5
The device shows the real-time
temperature on the upper left side of live
view interface.
4.4
Enhance High-Temperature Target
In target enhancement function, when the
target’s temperature is higher than the set value,
the target’s color will change to red
Steps:
1
In the live view interface, press
to
show the menu.
2
Press
/
, and select
Palettes
.
3
Switch the palette mode to
Above Alarm
.
4
Set the temperature. When the
temperature of target is higher than the
set value, the target will be red in live
view.
5
Press
to save and exit.
4.5
Set Temperature Alarm
Set the alarm rules and the device will alarm
when the temperature triggers the rule.
Steps:
1
In the live view interface, press
to
show the menu.
2
Press
/
, and select
Alarm
.
3
Press
to enable the function, and
you can select flashing alarm or audible
alarm as required.
Note
The white light will turn off automatically
after enabling flashing alarm.
4
Select the alarm rule and set the alarm
and pre-alarm temperature. When the
target’s temperature is higher or lower
than the threshold value, the device will
output alarm.
5
Press
to save and exit.
5
Capture Snapshots
Steps:
1.
In the live view interface, press
to
show the menu.
