background image

Maintenance Schedule 

      

*Maintenance should be conducted more frequently when the generator is being used in dusty areas.

**These items should be serviced by a professional mechanic, unless you have the proper tools and 
are mechanically proficient. Hike Crew is not liable for damage to parts sustained due to mechanical 
ineptitude. Don’t try to replace it if you’re not sure you can. Don’t try to replace it because you 
watched one YouTube video. 

***These are just recommended guidelines for scheduled maintenance. If you use your generator more 
often, or run it for extended periods of time, the engine may require servicing more frequently.

Changing the Oil

While the engine is shut down, you should make sure to remove the oil quickly and completely.

1.

 Loosen the air filter maintenance cover screws and remove the air filter maintenance cover.

15

Regular Service Period***

Every use Every month or 

every 10 hrs

Every 3 months 
or every 50 hrs

Every 6 months 
or every 100 hrs

Every 2 yrs. or 
every 300 hrs

Item

Engine oil

Air filter

Spark plug

Spark arrestor

Valve clearance

Fuel tank & filter

Cylinder

Fuel line

Check/adjust

Clean

Clean

Every 300 hrs. **

Every 2 years (Replace if necessary)**

Check

Check level

Check

Check/adjust

Clean

Replace

Clean

*

**

Replace

Air Filter & Oil Maintenance Cover

Screw

Screw

Summary of Contents for HCIG2250























Reviews: