Hikari HW782TA, Instruction Manual Book

Page: 199 / 206

29/36
Press button, the corresponding stitches above added 1, switch circularly
among 0-F, press button, it returns to the holding state.
4.6 Technical parameter set
4.6.1 Password input
1. Press twice continually at the holding state, P light is on ,other LED is off, it goes
into the state of technical parameter setting, digital tube display password input as
follows :
2. Press button,it can input password, the inital input password is
2222,press to confirm, if the entered password is correct ,then it goes into the
state of modifying technical parameter ,display as follows :
Back-tacking sewing mode
Back-tacking sewing C
Back-tacking sewing D
Parameter number
Parameter contents