Hikari HW782TA, Instruction Manual Book

Page: 197 / 206

27/36
4.3 Sewing mode and each section stitches setting
Press button at the holding state, then it goes into sewing mode set state: SWM
is on, and other LEDs are off.
T1,T2 digital tube display current sewing mode(00:free sewing;01: constant-dimension
sewing;02:four-segment sewing; 03:seven-segment sewing; 04:eight-segment sewing; 05:W
sewing ), if it is constant-dimension sewing or multi-segment sewing ,T3 digital tube display
current section code “E
、
F
、
G
、
H”,T5 and T6 digital tube display current section stitch.
Take four-segment sewing for example, it displays as follows:
It doesn’t display current sewing section if it is at free sewing .
Selection of sewing mode
、
section number and stitches:
1.Press button, T1,T2 digital tube can display circulately current sewing mode
among 00~05;
2. Press button ,T3 digital tube can display circulatly current section number
among “E
、
F
、
G
、
H”.
3. Press or button, corresponding stitches added 10 or 1 and circulae
among 0-99;
、
is invalid; press button, it returns to the holding mode .
Sewing mode
Current sewing section
Current stitch