Network Turret Camera
·
Quick Start Guide
2.1.3 Type III
Steps:
Trim Ring
Mounting Base
Enclosure
Camera
①
②
③
1.
Disassemble the camera.
1).
Rotate the trim ring anticlockwise to take it off from the
camera.
2).
Rotate the mounting base anticlockwise to take it off from the
camera.
3).
Separate the camera and the enclosure.
Figure 2-15 Disassemble the Camera
2. Install the memory card.
1).
Find the Micro SD/RST cover on the side of the camera.
Micro SD/RST
Cover
Figure 2-16 Micro SD/RST Cover
24
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
