manualshive.com logo in svg

HighPoint RocketStor 6414TS, User Manual

Share
Download
HighPoint RocketStor 6414TS User Manual Download Page 11

11 

 

 

Note 2

: Refer to your motherboard manual for instructions on how to locate 

your PCI Express slot. 

2.

 

Align the RocketRAID 2711 with the PCIe slot and push straight down until card is 
fully seated. 

3.

 

Tighten the connection by fastening the RocketRAID bracket and enclosure 
together. 

 
A PCI-Express 2.0 x8 card is compatible with PCI-Express 2.0 x16 and PCI-Express 3.0 
x16 slots. 

 

 

 

Step 2: Install/Update Drivers 

 

Installing Drivers on an Existing Operating System 

 
Drivers provide a way for your operating system to communicate with your new 
hardware. Updating to the latest drivers ensures your product has the latest 
performance, stability, and compatibility improvements. Drivers are updated regularly 
at 

www.highpoint-tech.com

  

For 

Windows

 Users: 

1.

 

Download the latest driver files from our website 

www.highpoint-tech.com > 

Support > Documents and Downloads > RocketStor 6414TS.

 

2.

 

Extract the downloaded files onto your PC and note the location of the files. 

Summary of Contents for RocketStor 6414TS




































































Reviews:

No comments

Brands by name

Popular brands

Load more brands