HighPoint RocketStor 6314X, User Manual

Page: 9 / 60

9
Setup the hardware
Step 1. Plug in the power cord for your RS6314X. Note: To prevent physical drive damage, keep
the RS6314X oriented upright when in use.
Figure 5. Power Cord plugged into back panel
Step 2. Plug one end of the Thunderbolt ™ cable to either of the RS6314X ports and the other
end to your computer ’s Thunderbolt ™ port.
Figure 6. Connect to either the right or left Thunderbolt ™ port.
Step 3. Press then pull the blue tab on each disk tray to unlock and slide out each tray.
Step 4. Mount your hard drives onto each tray using the provided screws. (Note: see HELP for a
list of recommended hard drives)
Step 5. The disk trays have pre-drilled holes compatible with 3.5 ” and 2.5 ” hard drive form
factors. SSD holes are drilled on the bottom of the disk tray.