HighPoint RocketStor 6314X, User Manual

Page: 40 / 60

40
Reinserting the same disk should trigger rebuilding status, since data on the disk would be
recognized.
If you insert a new disk, clicking add disk will give you the option to select that disk and add it
to the array.
Disabled Status
A disabled status array means that your RAID level does not have enough disks to function.
⚫
Your data will be inaccessible
⚫
Rebuilding will not trigger, since RAID does not have enough parity data to rebuild upon
Your options in Maintenance are:
⚫
Delete
⚫
Unplug
⚫
Recover
Delete – will delete the array
Unplug – will take array offline, making it safe to remove
Recover – will attempt to recover the array using the list from the recover tab
Expanding an Existing Array
Important: It is recommended to Verify/Rebuild your array before Expanding or Migrating.
Once you start an OCE/ORLM procedure, you
can stop the process but it must be resumed
until completion.
To add more capacity to your current configuration follow these steps:
1. Log in WebGUI