HIGHLEAD HLK-3020, Instruction Manual Parts Catalog

Page: 7 / 45

—
5
—
(1) Mount the power switch
①
with the wood
screw
②
underneath the table as shown on
the figure
．
(2) Fix the electric cords with the staples
③
underneath the table
．
(3) Connect the plug
⑧
of the power switch
①
to the control box
⑦．
(4) Attach the power plug
⑤
to another end of
the power switch cord
④．
3-3.Connection of the foot switch
Connect the foot switch
⑥
to the relevant socket (the middle socket) on control box
⑦
.The foot switch is
enclosed in the accessory box.
3-4.Installation of the sewing machine head
Caution
★
For the safety
，
lift and move the sewing machine heads with powerful lifting equipment under monitor of
more than two people.
(1) Install the stand and put tabletop
①
on it.
(2) Take out the support blocks
③
from accessory box and place them on the transoms of stand.
(3) Put the sewing machine head
⑧
into the cut-out of machine head
and make sure the four feet of
machine heads are seating on
the support blocks.
(4) Set machine head onto stand
with Allen screws
⑤
, and
washers from accessory box as
following figure shows.
(5) Adjust the Allen screws
②
to
raise the table top up onto the
bottom of big slide plate
⑨
of
machine head. Connect the
tabletop and stand with bolts
⑦
.
(6)
Install oil pan
③
on the
transoms of stand with screws
④
.