HIGHLEAD HLK-3020, Instruction Manual Parts Catalog

Page: 16 / 45

—
14
—
7-5.Adjustment of the mechanical home position
[NOTE]The mechanical home position is set at the center of the sewing area as default
．
Note: The second mechanical home position can be set with referring to Operation Manual of control system.
7-5-1.Shifting the mechanical home position along X direction
(1) Loosen the set screws
①
(2 pieces) of X-detector plate
③
, Move the detector plate
③
to the right to
move the mechanical home position towards B or moved the plate to the left to move mechanical
home position towards A.
(2) Tighten the set screws
①
securely after adjustment.
7-5-2.Shifting the mechanical home position along Y direction
(1) Loosen the setscrew
⑤
of Y-detector plate
⑥．
(2) Move the detector plate
⑥
forward to move the mechanical home position towards C or moved the
plate to backward to move mechanical home position towards D.
(3) Tighten the screw
⑤
securely after adjustment
．
[NOTE] When the original mechanical home position is shifted
．
Please check the clearance between the X
detector plate and the X detector
．
This clearance should be set within the range of 1.0—1.5 mm
．