Item:
Description:
5801200
2-Bike Carrier
ASSEMBLY INSTRUCTIONS
:
1.
Insert Bike Carrier Shank into vehicle’s hitch receiver,
lining up pin holes, and secure with 1/2” Pin and Clip
supplied. Figure 1.
2.
For use on 2” receiver hitches, attach the 1-1/4” to 2”
adapter – See shank adapter instructions.
3.
Place Main Support Tube onto Bike Carrier Shank,
and fasten to Bracket using four (4) 5/16” carriage
bolts and lock nuts supplied.
4.
Slide the Arm Supports onto the Main Support Tube
and secure with the two (2) bail safety pins.
Figure 2.
Note: Lower Hook faces vehicle, upper Hook faces
rearward.
5.
Slide Wheel Hook Assemblies onto arm supports as
shown – two hooks facing vehicle and two hooks
facing rearward. Leave hooks loose at this step.
Note: The Wheel hooks must be installed so that the
Hook is in a vertical position as shown in Figure 3.
5/16” x 1.00
CARRIAGE BOLT
5/16” LOCK NUT
(4) PLACES
ARM SUPPORT (2)
BAIL SAFETY PIN (2)
WHEEL HOOK ASSEMBLY (4)
WHEEL HOOK
SHOWN IN PROPER
ORIENTATION
FIGURE 3
FIGURE 2
SHANK
MAIN SUPPORT TUBE
FIGURE 1
½” PIN
½” PIN CLIP
LOWER HOOK
UPPER HOOK
