english
FITWARE SERIES
12
Fit
Ware
FM
Pulse
english
11
USING THE CHRONOGRAPH FUNCTION
The FitWare units are equipped with a digital
chronograph.
1. START
and
STOP
the
CHRONOGRAPH
by
PRESSING
the
S4
key.
2.
When stopped,
CLEAR THE CHRONOGRAPH
by
PRESSING
the
S3
key.
NOTE:
When you are viewing the Chronograph, the
FitWare unit will not count steps. If you are
exercising, do not stay in the Chronograph mode any
longer than necessary. REMEMBER: You do not need
to use the Chronograph to time your exercise
session. This is done automatically for you by the
TIMER
secondary function in the
STEP
mode.
CHRONOGRAPH MODE
(ALL MODELS)
1.
Plug the headphones into the jack located on the
side of the FitWare FM unit.
2.
Reset the radio to the lowest frequency by pressing
the reset button to the upper right corner of the face
of the unit.
3.
Advance to the next available frequency by
PRESSING
the large
SCAN
button located at the
center of the face of the unit.
CONTINUE TO
PRESS
the
SCAN
button until a desired station is
reached.
4.
When you reach the end of the FM frequency range,
you must reset the unit to its starting frequency to
repeat scrolling through the available frequencies
5.
To turn the radio off, unplug the headphones.
6.
The volume control for the radio is located on the
headphone wire.
CAUTION:
Leaving the headphones plugged in the
FitWare FM unit for extended periods of time will
drain the battery.
USING THE FM RADIO
(FITWARE FM ONLY)
FitWareIM 3/24/05 1:53 PM Page 14
