manualshive.com logo in svg

High Voltage DTS-60A, Operator'S Manual

Share
Download
High Voltage DTS-60A Operator'S Manual Download Page 64

DTS-60A O

PERATORS

 M

ANUAL 

 
 
 
 

54 

 

 

5.2.1 Select a Test 

The Select a Test menu displays the list of all the existed tests. These 
are the Simple Test, the Standards and the User Defined Tests, Figure 
4-3. An arrow at the right side of a test's name indicates that this is the 
last selected test. The latter is the test that will be started after turning-
on the equipment.  

 

 

Figure 4-3 – 

Select Program Menu

 

 

 
 

SELECT TEST

IEC 156/95      <--

VDE 0370

IEC 156/63

ASTM D1816/84A
ASTM D877/87

TEST

CREATE

SELECT

EDIT

DELETE

STEP 1

From the TEST menu point to SELECT.
Then press the ENTER key.

STEP 2

The system displays all the available tests. The
default test is indicated with an arrow at the left
side.
Use the UP and DOWN keys to select a test for
execution.

UP

DOWN

SELECT TEST

IEC 156/95      <--

VDE 0370

IEC 156/63

ASTM D1816/84A

STEP 3

Press the ENTER key to execute the selected test.
From now on this  test will be the default  test.

ENTER

 12:10   01/08/05   65 °F

 12:10   01/08/05   65 °F

 12:10   01/08/05   65 °F

ASTM D877/87

ENTER

Summary of Contents for DTS-60A




















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands