16
Instructions for use
GB
Cleaning the premotor filter
Pull the premotor filter up and out of the main unit. Both compo
-
nents (the outer fabric ring and the inner foam rink) can be tapped
against a hard surface or held under running water to clean them.
Cleaning/replacing the HEPA filter
To ensure full functionality, the HEPA filter should be cleaned
regularly and replaced around every 6 months, depending on usage.
Remove the filter unit by pressing the locking mechanism together
with two fingers and pulling it out of the main unit.
To remove the HEPA filter, unscrew the screw on the inside of the
filter unit.
Clean the HEPA filter by tapping it on a hard surface. If it is very dirty,
wash it under running water.
Put the cleaned or new filter in the filter unit and replace the screw.
NOTE!
Only use cold water to clean the filter and allow all parts to dry COMPLETELY before reassembling.
Changing the battery
Switch the appliance off. Press the battery release button and hold it
down. Remove the battery.
Insert a new battery and make sure you hear it clicking into place. If
you cannot insert the battery completely into the main unit, check to
see whether you have positioned it correctly.
Summary of Contents for Invictus X7
Page 1: ...13 Piece Kit Instruction Manual ...
Page 21: ...21 ...
